13-09-2017, 07:37 PM
Due to the good reviews for this unit I obtained one from Accuspark. I have not fitted it to my Ulster replica yet , but have done the following modifications to it. Replaced the bent oiler by taping the hole 1/4 BSW and fitting a bent one from a Ruby. I also machined a groove in the bottom of the drive shaft to drive the REV counter. This turned out to be easy as the shaft appeared to be regular mild steel and not case hardened like the shaft on the DJ4 I was using on the Ulster. This suggests that lubrication should be watched carefully ( wear my not be as important on electronic units as on points units).