24-08-2018, 05:59 PM
(24-08-2018, 04:52 PM)Steve Jones Wrote: Just measured two distance pieces, Chris. Both 0.625" as you suspected. Regretfully, no, neither are available as they're both part of CWP sets. Easy to make though. However, one CWP set did have an extra LH thread nut with it. Didn't realise I'd got it. No doubt I put it there so as not to loose it! You're welcome to that if we can arrange it. Send me a pm off thread.
Steve
Many thanks Steve. I've also heard from Ian meanwhile, who says 0.625" too. It should be easy enough to get one turned.
Thanks - will pm you.