22-06-2018, 10:30 PM
(This post was last modified: 22-06-2018, 10:32 PM by Bob Culver.)
A very burned valve or broken rings will cause a misfire at idle but should be obvious on the handle. To miss under all conditons needs a major leakage.
Is water entering the cylinder? Is the oil milky? When running with the plug out days it eject spray? If water is being ditributed through the inlet manifold to all cyls starting would be difficult.
Fresh petrol assumed.
Is water entering the cylinder? Is the oil milky? When running with the plug out days it eject spray? If water is being ditributed through the inlet manifold to all cyls starting would be difficult.
Fresh petrol assumed.