Slippery Anne Engine

[Steve Bryant]

Mark , it's all such beautiful work.
Stephen

Hi Stephen,

How is your build going?

Hi Mark,
 the build is proceeding at a snails pace with mods having been done to the pressure plate to adjust the release arms and making new rivets to attach clutch linings etc. One rear wing is now totally restored with the other partly done. I took the plunge and ordered new rims and spokes to rebuild the wheels so that they will actually be straight and round as this was the last big expense I had to make. I also made a stud and nut modification for the sump pan to save the threads in the crank case from premature failure.

I can't wait until the engine is done and in the chassis so i can actually start the body build, but as they say "it's all good " .
Cheers,
Stephen