Dynamator

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Dynamator

JonE

....

Joined: Aug 2017 Posts: 3,247 Threads: 360
Reputation: 16
Car type:

#31

06-05-2018, 06:38 PM

(29-04-2018, 11:45 AM)john lawes Wrote: Hi All , Just fitting my new Dynamator and the first thing i have spotted is that my example has 1/4 BSF threads in the aluminium end plate not 1/4 BSW as stated in the instructions. So check before you mangle these threads. best of luck john

what was the distributor clamp out of interest? I checked my original distributor clamp bolt and it FITS the dynomator AND both of the securing bolt threads... so does that mean they have now corrected them?

https://ulster7.wordpress.com https://sevenrk.wordpress.com/

« Next Oldest | Next Newest »

Messages In This Thread

Dynamator - by john lawes - 25-04-2018, 09:45 AM

RE: Dynamator - by bob46320 - 25-04-2018, 10:05 AM

RE: Dynamator - by JonE - 25-04-2018, 10:23 AM

RE: Dynamator - by Ruairidh Dunford - 25-04-2018, 10:10 AM

RE: Dynamator - by Alan - 25-04-2018, 10:15 AM

RE: Dynamator - by Ruairidh Dunford - 25-04-2018, 10:21 AM

RE: Dynamator - by Mike Costigan - 25-04-2018, 11:55 AM

RE: Dynamator - by Ian Dunford - 25-04-2018, 02:53 PM

RE: Dynamator - by Nick Turley - 01-05-2018, 02:41 PM