27-03-2018, 03:08 PM
Erich,
Your car is a 1930s Ulster type like mine. I used Chris Goulds book "how to build a 1930 Ulster replica "which shows the 3 bakelite saddles on the top face of the firewall. These are available from one of the usual A7 suppliers. I made mine out of an old black lavatory seat. The P clips are steel and are on the engine compartment valances,both nearside and offside. These are also available to buy but if not are dead easy to make. I attached mine to the valances with 2BA screws. Afraid I used plastic wire ties at places not immediately visible.
Your car is a 1930s Ulster type like mine. I used Chris Goulds book "how to build a 1930 Ulster replica "which shows the 3 bakelite saddles on the top face of the firewall. These are available from one of the usual A7 suppliers. I made mine out of an old black lavatory seat. The P clips are steel and are on the engine compartment valances,both nearside and offside. These are also available to buy but if not are dead easy to make. I attached mine to the valances with 2BA screws. Afraid I used plastic wire ties at places not immediately visible.