16-10-2023, 04:29 PM
(This post was last modified: 16-10-2023, 04:31 PM by Denis Sweeney.)
As Hugh said or with gentle use of a scissor jack to slightly raise the door.
I found filing flats on the heads of the pins allowed rotation of the pins which helped.
Also found with the pins removed, the holes in the hinges were very oval, worn thin and needed reforging and weld build up to strengthen them.
I found filing flats on the heads of the pins allowed rotation of the pins which helped.
Also found with the pins removed, the holes in the hinges were very oval, worn thin and needed reforging and weld build up to strengthen them.