13-10-2023, 07:40 AM
I was wondering whether any one have any experience melting and casting scrap Austin Seven castings; damaged pulleys and water manifolds especially, and if so, how it went.
I made a small press tool from Polymorph originally and although it worked it is intolerant of any misalignment. A cast aluminium version would be more robust.
I should be interested in hearing of anyone's experiences.
Jamie
I made a small press tool from Polymorph originally and although it worked it is intolerant of any misalignment. A cast aluminium version would be more robust.
I should be interested in hearing of anyone's experiences.
Jamie