The start of my van's body build

[Steve Bryant]

Hi all, today being a provincial holiday I was able to use the time to work on the van at work. A number of little things were done but the big step forward is that the B pillars are now installed to my satisfaction. It took ages to get the dimensions for the door opening the same at the top for both. Three countersunk stainless bolts were put through the outer steel sides and washers and nuts tightened up on the inside. I wanted them to be as strong as possible as they will have to take a beating from the door slamming.

I am also currently making the bending form for new wheel arch laminates to replace the two supplied that aren't usable.
Cheers,
Stephen