29-10-2022, 11:32 AM
My first BSA three-wheeler had a drooping tail, a fairly common problem with the model and I didn't realise how critical this was until I'd finished sorting it out. It was a runner with a recond. engine, gearbox and drive train etc., so it only needed upholstery, paint, soft top and widescreens and general finishing.
On my first test drive I discovered that taking a left hand bed required elbow work for the driver to keep the door from flying open. I did attend to the problem before taking Pam out for a run, a bit difficult to persuade the passenger to keep an elbow over the door edge when taking a right-hander!
On my first test drive I discovered that taking a left hand bed required elbow work for the driver to keep the door from flying open. I did attend to the problem before taking Pam out for a run, a bit difficult to persuade the passenger to keep an elbow over the door edge when taking a right-hander!