16-09-2022, 02:52 PM
Howard, I will try to jack the car up a little higher and report back after. Thanks.
Reckless. It is the semi-Girling front axle. One of the reasons I have chosen to only use one plate on the front is because the upper radius arm fixing is deeper at the rear and would require spacers to line up the axle eye bolt and the lower axle beam mounting bolt and I don't think that would be a sensible mod for the modification.
Reckless. It is the semi-Girling front axle. One of the reasons I have chosen to only use one plate on the front is because the upper radius arm fixing is deeper at the rear and would require spacers to line up the axle eye bolt and the lower axle beam mounting bolt and I don't think that would be a sensible mod for the modification.