13-12-2021, 11:41 AM
(This post was last modified: 13-12-2021, 11:42 AM by Tony Griffiths.)
A useful start is to click on the Ruby wiring schematic that can be found here. Download and get it printed A3: https://aus7in.wordpress.com/da7cwiring/
If you don't know this (and as everybody on the forum will advise) a really good earth is a tremendous help on a 6-volt system. I understand that, if you can run a cable direct from the battery's negative terminal to a point under the back seat and link all the lights to that, it's a great help.
If you don't know this (and as everybody on the forum will advise) a really good earth is a tremendous help on a 6-volt system. I understand that, if you can run a cable direct from the battery's negative terminal to a point under the back seat and link all the lights to that, it's a great help.