04-12-2021, 05:07 AM
(This post was last modified: 04-12-2021, 05:08 AM by Bob Culver.)
General readers please note the above reply is very specific to the particular brand of bolt, and not applicable to common moderately ht bolts original equipment (and if not fatigued by running loose, or by a myriad tightenings to fit bearings, or stretched by over tightening. entirely adequate to non astranomic revs and at torques akin those for common ht hardware. many similar revving cars with much heavier pistons and longer strokes get by with non exotic 5/16 bolts))