07-11-2021, 09:53 PM
ok, I will clarify, as it doesn't actually say anything about new pistons or not new pistons in the note.
I'm using old pistons which had ring gaps which were too big, so perhaps I should keep the helpers in them? I'll check for ridge and do the hone-y thing with the drill, but i can assume the bores have seen a bit of action - in a narrowboat - since last 040 rebore....
I'm using old pistons which had ring gaps which were too big, so perhaps I should keep the helpers in them? I'll check for ridge and do the hone-y thing with the drill, but i can assume the bores have seen a bit of action - in a narrowboat - since last 040 rebore....