30-08-2021, 05:23 PM
The picture in the original post looks like the axle introduced in 1930. If so case adjustments are done easily.
The pinion can be moved in and out by rotating the torque tube. The crown wheel can be moved side to side using the notched wheels behind the plates on the back of the axle either side of the diff.
No shims needed. However just which adjustment should be done is a more difficult question.
Help from an experienced helper would be the best course.
It is quite possible that adjustment would sort it out.
The pinion can be moved in and out by rotating the torque tube. The crown wheel can be moved side to side using the notched wheels behind the plates on the back of the axle either side of the diff.
No shims needed. However just which adjustment should be done is a more difficult question.
Help from an experienced helper would be the best course.
It is quite possible that adjustment would sort it out.
Jim