The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Gas lever
#9
Hey again Howard,
Ref; Part BN Clutch pedal spring.
Can you describe where this spring is positioned? My clutch lever has a lot of free play, flopping about is a good description, cannot locate this spring. The clutch engages and disengages but the pedal sits low to the floor. This clutch operation has not been tested on the ground so far.
We ran the motor 2 days ago, good oil pressure etc after getting the timing close enough to start. Reassembly has commenced and hope to get it off the blocks soon.

Did not expect a quick reply, we are in total lockdown here, sun is out and a good day ahead. To describe where we live I would say 100 klms from the Opera House New South Wales heheh.
Thank you for your help.
Reply


Messages In This Thread
Gas lever - by Gordon Critcher - 25-07-2021, 01:14 AM
RE: Gas lever - by Tony Press - 25-07-2021, 02:34 AM
RE: Gas lever - by Gordon Critcher - 25-07-2021, 05:40 AM
RE: Gas lever - by Tony Press - 25-07-2021, 06:26 AM
RE: Gas lever - by Chris KC - 25-07-2021, 08:54 AM
RE: Gas lever - by Howard Wright - 25-07-2021, 01:45 PM
RE: Gas lever - by Gordon Critcher - 25-07-2021, 10:44 PM
RE: Gas lever - by Howard Wright - 25-07-2021, 10:56 PM
RE: Gas lever - by Gordon Critcher - 25-07-2021, 10:58 PM
RE: Gas lever - by Howard Wright - 26-07-2021, 07:19 AM
RE: Gas lever - by Mark R - 26-07-2021, 09:22 PM
RE: Gas lever - by Howard Wright - 26-07-2021, 10:37 PM
RE: Gas lever - by Gordon Critcher - 26-07-2021, 11:14 PM
RE: Gas lever - by Tony Press - 27-07-2021, 12:30 AM
RE: Gas lever - by Howard Wright - 27-07-2021, 06:30 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)