06-02-2018, 07:59 PM
(04-02-2018, 09:26 PM)Ian Williams Wrote: Here are pictures of my current chassis in the early stages, everything is hot riveted together rather than welding, the additional sections, besides boxing the main rails and tying together the cross members will carry a stressed under tray. I will take pictures of this in a more advanced state if they are of help.
By using the late Girling brake cross shaft the weight saving from this is off setting the additional weight of the alterations, will it have been worth the trouble? Time will tell
That's a marvellous bit of work! Did you bend/fold those yourself, after drilling those large holes. Have I missed a post...what is the chassis about to be used for?
Arthur