25-01-2018, 01:12 PM
(This post was last modified: 25-01-2018, 02:55 PM by Steve Jones.)
It might simply be the angle the photo's taken at but the off side mudguard looks to be set at a slight angle. The top outer edge appears to be further out than the bottom outer edge. If that's so, setting the mudguard level will cause the bottom of the mudguard to step out correcting, to a degree at least, its apparent position in relation to the wheel/tyre.
That is, of course, if it really bothers you. One wing on my trials Chummy has been set at a slight angle for the last 15 years. It's each to his own of course but it's never stopped me or it doing what we do.
Steve
That is, of course, if it really bothers you. One wing on my trials Chummy has been set at a slight angle for the last 15 years. It's each to his own of course but it's never stopped me or it doing what we do.
Steve