09-05-2020, 03:07 PM
(This post was last modified: 09-05-2020, 03:08 PM by Rogerfrench.)
I must disagree with Colin Reed. There is no reason to lock the support hard, indeed I suggest that if it is allowed to rotate a little, on application of the brakes it will assume the correct angle. This happy state of affairs is provided by a thread in a thread, and as Mike Costigan has said, it's not going anywhere. At the same time, make sure the outer have plenty of curve. The curse of Bowden cables is friction, letting the cables run as free as possible overcomes it.