29-01-2020, 07:13 PM
Thanks Denis
I’ve now fitted a Big Seven steering arm which drops the drag rod all of 1/4”. Ah well it is still much beefier than the standard Seven. I will have to modify the flitch plate slightly.
Now a bit of frippery....
An ES Klaxon horn. Very loud and was an original fitment to the Fabric race cars! It works by spinning a serrated disc against a thin plate. I’ve had it all to pieces, sprayed it and fitted to a bracket on the rear cross member.
and I know it’s right in line for all the muck thrown up from the front wheels so a small stone guard may be needed.
Cheers
Howard
I’ve now fitted a Big Seven steering arm which drops the drag rod all of 1/4”. Ah well it is still much beefier than the standard Seven. I will have to modify the flitch plate slightly.
Now a bit of frippery....
An ES Klaxon horn. Very loud and was an original fitment to the Fabric race cars! It works by spinning a serrated disc against a thin plate. I’ve had it all to pieces, sprayed it and fitted to a bracket on the rear cross member.
and I know it’s right in line for all the muck thrown up from the front wheels so a small stone guard may be needed.
Cheers
Howard