07-11-2017, 09:26 AM
Well I’m with Ian on this one. Foolishly expensive route to take in my opinion but it’s good that we are different, wouldn’t it be bloody boring if we were all the same.
Nick, the pressure relief springs and balls are only a few quid from Jamie and after advise from Ruairidh I change them as a matter of course on a rebuild. Check that the ball seats well with no obstructions. If it ends up with further strip down it would be worthwhile to have the pump bored out to get greater pressure, something else I do as standard.
Nick, the pressure relief springs and balls are only a few quid from Jamie and after advise from Ruairidh I change them as a matter of course on a rebuild. Check that the ball seats well with no obstructions. If it ends up with further strip down it would be worthwhile to have the pump bored out to get greater pressure, something else I do as standard.
I am always interested in any information about Rosengart details or current owners.