The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bacon slicer advice needed
#30
This reminds me of our second RN 40 years ago, the starter wasn't connected as the cable wouldn't reach the oversize battery behind the passenger seat but it started easily on the handle. I eventually bought a battery which would fit it's box and connected up the starter, this operated well but the engine wouldn't start then IĀ spotted the fan was rotating the wrong way. So I fitted a spare starter and that cured the problem. Some time later I was at John Platts and asked about a 3 speed starter motor, sorry we haven't got one but we a 4 speed starter motor which goes the wrong way which would do was the reply. I bought it swapped the casings with their field coils and bendix drives over and I now had two motors which went the correct way and sold the 4 speed one.
Reply


Messages In This Thread
Bacon slicer advice needed - by AllAlloyCup - 07-05-2019, 07:12 PM
RE: Bacon slicer advice needed - by Ian McGowan - 07-05-2019, 07:27 PM
RE: Bacon slicer advice needed - by AllAlloyCup - 07-05-2019, 07:34 PM
RE: Bacon slicer advice needed - by Ian McGowan - 07-05-2019, 07:36 PM
RE: Bacon slicer advice needed - by AllAlloyCup - 07-05-2019, 07:49 PM
RE: Bacon slicer advice needed - by Parazine - 07-05-2019, 07:50 PM
RE: Bacon slicer advice needed - by AllAlloyCup - 07-05-2019, 08:02 PM
RE: Bacon slicer advice needed - by AllAlloyCup - 07-05-2019, 09:33 PM
RE: Bacon slicer advice needed - by Ian Williams - 07-05-2019, 09:51 PM
RE: Bacon slicer advice needed - by Parazine - 07-05-2019, 09:52 PM
RE: Bacon slicer advice needed - by AllAlloyCup - 07-05-2019, 10:42 PM
RE: Bacon slicer advice needed - by Hedd_Jones - 07-05-2019, 10:53 PM
RE: Bacon slicer advice needed - by AllAlloyCup - 08-05-2019, 08:32 AM
RE: Bacon slicer advice needed - by AllAlloyCup - 08-05-2019, 12:50 PM
RE: Bacon slicer advice needed - by Austin Carr - 08-05-2019, 01:53 PM
RE: Bacon slicer advice needed - by AllAlloyCup - 08-05-2019, 07:35 PM
RE: Bacon slicer advice needed - by Tony Press - 09-05-2019, 01:06 AM
RE: Bacon slicer advice needed - by AllAlloyCup - 09-05-2019, 08:29 AM
RE: Bacon slicer advice needed - by AllAlloyCup - 09-05-2019, 11:19 AM
RE: Bacon slicer advice needed - by AllAlloyCup - 09-05-2019, 01:15 PM
RE: Bacon slicer advice needed - by AustinWood - 09-05-2019, 02:08 PM
RE: Bacon slicer advice needed - by AllAlloyCup - 09-05-2019, 03:14 PM
RE: Bacon slicer advice needed - by AllAlloyCup - 09-05-2019, 10:37 PM
RE: Bacon slicer advice needed - by Dave Mann - 10-05-2019, 09:16 AM
RE: Bacon slicer advice needed - by JonE - 26-05-2019, 03:41 PM
RE: Bacon slicer advice needed - by AllAlloyCup - 26-05-2019, 04:28 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)