07-02-2019, 12:12 AM
(06-02-2019, 06:04 PM)Derek Sheldon Wrote: Dis grams from C Guold. Make a wooden former and cut and shut mild steel to gitChris KD - yes, arrived yesterday, Thank you. Wrote you a Thank You letter but haven't posted it yet! To Others - I made several Brooklands silencers over the years, copying what I thought was an original one. It had flat ends. I recall with chagrin one made for a friend and he decided to make it look "pretty" and polished the steel. To assist this he ground down the welds on the joins. A few months later the muffler disintegrated with a roar whilst he was driving his Ulster! Turned out he'd been a little too exuberant with his grinding wheel and everything was paper thin. Something to be careful about. Cheers, Bill in Oz