18-08-2018, 07:49 PM
(18-08-2018, 07:30 PM)Robert Foreman Wrote: Hello Chris,
on my Ulster reproduction I used a RN type radiator with the neck at the front.
Mr Bryant of Tunbridge Wells removed the original neck and soldered an L shaped patch over the hole . Then he soldered a new neck in the correct position and recored it with a A type film to the correct height.
If you have a new neck turned up to the correct shape then most competent radiator companies should be able to to do the job for you.
There is a company in Australia who still make the dimpled top tank if you choose to replace the existing one
Hope this is of help,
Robert
Thanks for this info Rob.
Don't suppose you have the details of the company which makes the tank?