23-08-2024, 09:17 PM
I have chester tools lathe [chinese origin] When i bought mine i walked into show room with A7 drum in my hand the salesman said thats A7 and it will fit.
It is perfectly ok for my needs top and tailing bushes and very rarely screwcutting.
i did a toolroom apprenticeship many years ago so am quite happy with its accuracy.
The advantage is it fits on top of a cabinet at the side of the garage.
I cover mine with a large towel during the winter to prevent surface rust.
It is perfectly ok for my needs top and tailing bushes and very rarely screwcutting.
i did a toolroom apprenticeship many years ago so am quite happy with its accuracy.
The advantage is it fits on top of a cabinet at the side of the garage.
I cover mine with a large towel during the winter to prevent surface rust.