The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.27 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rad cowl strengthening bar
#1
I recall there was a discussion recently about a bar that fits across the back of the radiator and strengthens the cowl. A search doesn't seem to turn up what I recall. I'll note that Chris Gould's Ulster book says that the clearance between the radiator and fan should be 1/8th inch which doesn't seem to allow enough room.

Erich in Seattle
Reply
#2
The bar is arched to clear the fan, I don't have a picture to hand but can take one
Black Art Enthusiast
Reply
#3
Thank you, Ian. I would like to see it, along with rough dimensions.

Best,

Erich
Reply
#4
I posted this in your thread “wing supports for Ulster reps” thread Erich.

   
Reply
#5
The brace depicted in Ruairidh's picture is made from 1 5/8" x 1/8" mild steel flat bar, and the bow is 2'' high, easy enough to make.
Black Art Enthusiast
Reply
#6
....and if you can't, Rod Yates has them ready to bend to suit your aperture...
Reply
#7
   
This is a strenthening bar on an A7 Arrow 2 seater 1931.
Reply
#8
Just wondering if Gordon England cars with
headlamps bolted directly to the cowl
Used a strengthening bar?

My car has CAV lamps( NOS!) but I still
Have to fit them.

Regards
Bill G
Aka AllAlloyCup
Based near the Scottish Border,
Reply
#9
(31-01-2018, 11:54 AM)AllAlloyCup Wrote: Just wondering if Gordon England cars with
headlamps bolted directly to the cowl
Used a strengthening bar?

See here Bill:

https://gordonenglandregister.wordpress....rousel-716
Reply
#10
Thank you all.

Best,

Erich
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)