All parts are usable, used spares unless specified. Postage & packing at cost (up to 2kg £3.00)
"Every thing must go!"
Fan pulley eccentric shaft for coil engine complete with original square nickel(?) grease nipple £5.00
BA 239 original Bottom pulley. taper a bit scruffy £2.50.
Ditto REPRO (no casting number mark) NEW £17.50
Planet wheel for 1/2" "D" shaped shaft with bush fitted appears new? 1.5/8" max o/d 1.1/8" smaller dia. £4.00
Matched pair timing gears (well - tied together with VERY old string!-) 30 tooth 1A486 (0 2) & 15 tooth (0 1)
Very small chip out of one tooth on large gear. £15.00
Chummy side screen socket bracket and pair of hood frame hinge supports (no idea how these got left over...!
Can email photos £6.00 lot
Used but sound pair of 3.5" kingpins (diameters 0494-.497 & .204/.508) £6.00
TRE Ball pin (new) plus spring with cup & solid cup. £5.00
3x spark plugs (NAPA 581) & 2x Champion K17 £5.00 lot
Pair if bob weights with pins (brass) and 2.0 needle valve assembly for Zenith bronze 22FZ Carb £4.00
Very early Lucas Distributor cap Marked "LUCAS Type DJ 4" and the outlets helpfully numbered 1,3.4.2 (and notched by stupid previous owner who could not read!) complete with 5 acorns, no centre carbon brush/spring. Probably a curiosity with the embossed markings rather than one to use...but it MIGHT work! £7.50 (worth it for the acorns!)
Any questions please ask.
Not easily offended by offers on bulk deals!
David
"Every thing must go!"
Fan pulley eccentric shaft for coil engine complete with original square nickel(?) grease nipple £5.00
BA 239 original Bottom pulley. taper a bit scruffy £2.50.
Ditto REPRO (no casting number mark) NEW £17.50
Planet wheel for 1/2" "D" shaped shaft with bush fitted appears new? 1.5/8" max o/d 1.1/8" smaller dia. £4.00
Matched pair timing gears (well - tied together with VERY old string!-) 30 tooth 1A486 (0 2) & 15 tooth (0 1)
Very small chip out of one tooth on large gear. £15.00
Chummy side screen socket bracket and pair of hood frame hinge supports (no idea how these got left over...!
Can email photos £6.00 lot
Used but sound pair of 3.5" kingpins (diameters 0494-.497 & .204/.508) £6.00
TRE Ball pin (new) plus spring with cup & solid cup. £5.00
3x spark plugs (NAPA 581) & 2x Champion K17 £5.00 lot
Pair if bob weights with pins (brass) and 2.0 needle valve assembly for Zenith bronze 22FZ Carb £4.00
Very early Lucas Distributor cap Marked "LUCAS Type DJ 4" and the outlets helpfully numbered 1,3.4.2 (and notched by stupid previous owner who could not read!) complete with 5 acorns, no centre carbon brush/spring. Probably a curiosity with the embossed markings rather than one to use...but it MIGHT work! £7.50 (worth it for the acorns!)
Any questions please ask.
Not easily offended by offers on bulk deals!
David