Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
various bits
#1
pair of 4.00 x 19 tyres good tread but old £15
Austin stamped early hub centre screw cap/cover £15
heavy Steel screw on cover; seems same thread as the dust caps and longer in body £8

1 1/2" spring pipe bender 2 feet long £20
33 no. countersunk crosshead type machine screw 1/4 BSF 1/2" (0.71 inch full length) £5
big spring for door glass mechanism £6
Torque tube mount screw top (base) £7
late starter dog £8
chummy updraft manifold £13
presentable pressed steel brake drum £13
Speedex nut remanufacture £9 each or hefty discount for the last set of 12.
goodish 22FZB casting £25

good original bonnet catches pair, down to the knuckle part. £ GONE
new old stock flexi joint £10
Syn gearbox 4 speed top casting £10
screw brake adjusters £ GONE
oil pump complete with innards, drive, both bolts £GONE
box inner handles - not original £ GONE
cut down tappet guides set £ GONE
SU GX needle £5
new Austin patent plate repro £GONE
Herbert Austin book by Roy Church £14 now 12
reamer Dormer taper pin 1/4 inch new boxed £ GONE
T handle stainless steel with c.8mm reamer £6
special pedal brake and (welded) original pad - shortened under pad by 2" £ GONE
special pedal throttle with stop for hand throttle, but very altered £10
Ruby manifold £ GONE
Brooklands screen brackets and securing bolts £ GONE
pair rubbolite rear lights dual pole with side illumination panel, round lens of porkpie area.. new old stock £55 now 45 (note these are not Divers helmet type)

pm an email address for photos
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)