The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.27 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
propshaft leather gaiter and bobbins
#11
The only thing I can add to this is
 the bobbin I removed from my 26 sports some 50 years ago, was held together by a blind small nail each side.

I am currently suffering from a vibration between 30 and 40 and hope it eminates from the tailshaft.  Ruaridh your "Gob" theory bears investigating,  cheers  Russell
Reply
#12
I can confirm the small blind nail observation Russell.

I presume you are familiar with the trick of rotating the jubilee clip (or whatever you have) until the vibration is reduced?
Reply
#13
I will pop primrose on the hoist tomorrow and check. I will also check if the bobbin is a sliding fit as someone wished to know, and report back.  cheers  Russell.
Reply
#14
(26-01-2018, 01:30 PM)squeak Wrote: I will pop primrose on the hoist tomorrow and check. I will also check if the bobbin is a sliding fit as someone wished to know, and report back.  cheers  Russell.

I can confirm the two blind nails in  an original bobbin and the careful placement of the (in my case) jubilee clips to stop tailshaft vibration.

Cheers, Tony.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)