16-01-2018, 08:42 PM
(04-01-2018, 10:34 PM)Ruairidh Dunford Wrote: A stainless steel strap beneath the trim panel (with the correctly orientated twist in it) pinned from front top corner to bottom rear corner will pull the door in. I have also used a thin stainless steel rope rope and rigging adjuster to do the same job.
Hi Ruairidh, I am in the process of trying to pull the bottom corner of the RP doors in using your suggested method of the stainless strip. The protrusion is at the bottom of the door catch side.
You suggest fixing the strip from top corner to bottom rear corner. How do I deal with the window winder mechanism that is in the way on top R/H corner. The stainless will foul this.(Or have I missed something).
Smiley.