The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.27 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Oil pressure guage
#1
After working without problem for the past year our oil pressure guage has begun 'sticking' for several minutes before acting normally, smacking across to full scale and then settling to 5/7psi for normal running  There are no obvious leaks, actual pressure is normal it just seems to be a sticky guage.  There doesn't appear to be any interference between needle and the face of the guage. Is this a common problem?  Can it be fixed?  Any advice welcome.
Cheers from Chris and Hilary
Reply
#2
Possibly a bubble in the oil line, could try slackening the feed at the gauge, wrapping the joint in a rag, start up and when the rag is oily switch off and tighten.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)