29-02-2020, 02:57 PM
Hi Robert,
The ID of the Nippy centre camshaft bearing is 33.92 mm ( slight surface rust on bearing)
I had to measure with digital caliper then zero before withdrawing the caliper then close caliper to get the measurement as it was impossible to read the caliper in situ.
I hope this will be of use to you.
The ID of the Nippy centre camshaft bearing is 33.92 mm ( slight surface rust on bearing)
I had to measure with digital caliper then zero before withdrawing the caliper then close caliper to get the measurement as it was impossible to read the caliper in situ.
I hope this will be of use to you.