yes, confirm that the end of the tape is hard up against the tang, and the dimensions read off the tape are correct, but like I say, it could have been cut down... I will go and have another look at the free end
If the boss is there, you could drill and tap it to suit?
Just had another look, un-screwed it from the gearbox casing, more dimensions for you, I would suggest that the tip has been damaged, it is rough, hope the photos show this, so it may need to be longer
[attachment=5308]
[attachment=5309]
[attachment=5310]
[attachment=5311]
[attachment=5312]
If the boss is there, you could drill and tap it to suit?
[attachment=5312 Wrote:GK5268 pid='23557' dateline='1549463686']yes, confirm that the end of the tape is hard up against the tang, and the dimensions read off the tape are correct, but like I say, it could have been cut down... I will go and have another look at the free end
If the boss is there, you could drill and tap it to suit?
Just had another look, un-screwed it from the gearbox casing, more dimensions for you, I would suggest that the tip has been damaged, it is rough, hope the photos show this, so it may need to be longer
[attachment=5308]
[attachment=5309]
[attachment=5310]
[attachment=5311]
[attachment=5312]