04-08-2020, 02:27 PM
(01-08-2020, 10:24 AM)MartinH Wrote: Not a good idea to mix led and conventional bulbs on the indicators. The filament in an incandescent bulb provides a leakage to earth that will needs diodes to allow the leds on the same circuit. The leds also require a low current flasher unit so you really can't mix them. Get an led flaher unit and fit led bulbs all round.Good advice — then you can de rate you dynamo output plus run all day with headlights etc on which helps others see you. Bikers do it plus just about everybody else these days. Just make sure you LEDs are well earthed.