22-04-2020, 09:26 PM
Hi Steve
I did this last week. Only I’ve incorporated a fixed shackle plate in mine. I used 1” tube thick walled tube (3/4” inner diameter) rather than boring out solid bar for the spacer. I also had a propane burner AND portapak gas welder to get the steel soft enough to bend the kink!
Cheers
Howard
I did this last week. Only I’ve incorporated a fixed shackle plate in mine. I used 1” tube thick walled tube (3/4” inner diameter) rather than boring out solid bar for the spacer. I also had a propane burner AND portapak gas welder to get the steel soft enough to bend the kink!
Cheers
Howard