08-04-2020, 08:50 AM
(This post was last modified: 08-04-2020, 08:57 AM by Mark McKibbin.)
Bill Sheehan kindly gave me an oil button bezel that had been made donkey years ago by Bob Booth so I could fill the hole in my dash with something that looked like an oil button. I have an oil pressure gauge so don't need a button but would like a lamp for the indicators, so have machined a plumbing fitting into a lampholder that the bezel screws onto. Will probably dye the lens a bit darker to make the subterfuge complete. I have ordered a nickel anode so electroplating in a week or two. This self isolating has some benefits.
Cheers
Mark
Mark