07-12-2019, 09:18 PM
Hi Robert
That is a very elegant solution.
I’ve recently had a shortened Ruby shaft fitted with new ends. At the flexible coupling end this was no problem just a large flange but at the torque tube end I’ve ended up with the pinion flange being re-drilled to fit a smaller 6 hole UJ flange. It’s OK but not as good as your solution.
Cheers
Howard
That is a very elegant solution.
I’ve recently had a shortened Ruby shaft fitted with new ends. At the flexible coupling end this was no problem just a large flange but at the torque tube end I’ve ended up with the pinion flange being re-drilled to fit a smaller 6 hole UJ flange. It’s OK but not as good as your solution.
Cheers
Howard