22-11-2018, 08:35 PM
(This post was last modified: 22-11-2018, 08:36 PM by AllAlloyCup.)
0CA86549-D6DC-42E5-BCAA-ED6C408E70A6.jpeg (Size: 57.33 KB / Downloads: 413)
F2284693-4160-4F5D-9A91-780AC0E428CF.jpeg (Size: 53.18 KB / Downloads: 410)
Taking a rest from bodywork and switched
to rebuilding the engine with a new steel
crank and remetalled rods.
Using a new silicone block to crankcase gasket.
Will put the pistons in tomorrow.
Regards
Bill G
Aka AllAlloyCup
Based near the Scottish Border,