18-06-2025, 06:42 AM
On my ulster Rep, there is flat round piece, much like a washer, attached to the wing support(cycle wing) for the R 47 to mount on. The R 47 has a male rounded bit on the bottom, which fits into a female dished/rounded bit to allow adjustment of the headlamp. The issue is that the dished/rounded bits bottom doesn't make very good contact with the mount. it seems like there should be something which gives more support. I've got both nuts(no jokes, please) and on one fixture, a spring, on the other just a lock washer. It seems I'm missing some bits. I can't find any proper diagrams or parts break down of the R 47, including how it was attached to the touring wings. Can anyone offer advice on this or an exploded diagram of all the bits?
Thank you for any help.
Erich in Mukilteo
Thank you for any help.
Erich in Mukilteo