propshaft leather gaiter and bobbins

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

propshaft leather gaiter and bobbins

Tony Press Offline

Older Member

Joined: Aug 2017 Posts: 1,660 Threads: 38
Reputation: 15
Location: Malvern, Victoria, Australia

#14

26-01-2018, 10:05 PM

(26-01-2018, 01:30 PM)squeak Wrote: I will pop primrose on the hoist tomorrow and check. I will also check if the bobbin is a sliding fit as someone wished to know, and report back. cheers Russell.

I can confirm the two blind nails in an original bobbin and the careful placement of the (in my case) jubilee clips to stop tailshaft vibration.

Cheers, Tony.

http://austin7club.org

« Next Oldest | Next Newest »

Messages In This Thread

propshaft leather gaiter and bobbins - by JonE - 25-01-2018, 04:24 PM

RE: propshaft leather gaiter and bobbins - by Mike Costigan - 25-01-2018, 05:52 PM

RE: propshaft leather gaiter and bobbins - by Dave Mann - 25-01-2018, 11:20 PM

RE: propshaft leather gaiter and bobbins - by Ian Williams - 26-01-2018, 01:05 AM

RE: propshaft leather gaiter and bobbins - by JonE - 26-01-2018, 09:08 AM

RE: propshaft leather gaiter and bobbins - by Ruairidh Dunford - 26-01-2018, 09:13 AM

RE: propshaft leather gaiter and bobbins - by Ruairidh Dunford - 26-01-2018, 10:19 AM

RE: propshaft leather gaiter and bobbins - by Dave Mann - 26-01-2018, 10:29 AM

RE: propshaft leather gaiter and bobbins - by Ian Williams - 26-01-2018, 10:53 AM