24-02-2021, 02:09 PM
(This post was last modified: 24-02-2021, 02:11 PM by darcher121.)
IMG_3398.jpg (Size: 48.92 KB / Downloads: 514)
Any clever ideas to remove this lever?
If I have read the drawing right, if I can get this O/SÂ lever off, the inner shaft should draw away towards the N/S.
But it is stuck fast. Plenty of penetrating oil and some heat, but there is little to grab onto.
Rear springs still stuck in the chassis. Buying a bigger hammerÂ