The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.27 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cam bearing oil restriction
#1
I am considering reducing the feed to the cam bearings, i have read that it is possible to fit drilled 1/8bsp threaded plugs into the galleries, my question is, is it a necessary to add o rings to the bushes at the same time, or is that just a further improvement? The bush has a groove Running across the bearing face so I can’t believe it would be under much pressure, especially with a reduced flow. 

I don’t currently have access to a lathe so keen to avoid paying someone to do machining work for me if possible!
Reply


Messages In This Thread
Cam bearing oil restriction - by tomcotez - 27-12-2020, 10:13 PM
RE: Cam bearing oil restriction - by Bob Culver - 28-12-2020, 01:57 AM
RE: Cam bearing oil restriction - by Chris KC - 28-12-2020, 12:04 PM
RE: Cam bearing oil restriction - by dickie65 - 28-12-2020, 08:59 PM
RE: Cam bearing oil restriction - by Colin Wilks - 28-12-2020, 10:09 PM
RE: Cam bearing oil restriction - by tomcotez - 28-12-2020, 10:26 PM
RE: Cam bearing oil restriction - by dickie65 - 29-12-2020, 01:31 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)