Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
APF bulb positioning.
#7
Just adding this for completeness and for anyone looking in the future. Stuart is correct, the curved filament was the main and the straight one is the dipped and that goes at the top of the bulb in the car. It was hard to tell which was on the centre line so I had to do a few trial fits with a large box sitting in front of the car to see the pattern. Then confirmed it later once it got dark outside. Just have to accurately position them now.

The info is in here: https://vehicleinspection.nzta.govt.nz/v.../headlamps

Always tricky to understand since they say what makes a car fail not what makes it pass but it has charts there showing the pattern.

Simon
Reply


Messages In This Thread
APF bulb positioning. - by jansens - 25-10-2020, 04:58 AM
RE: APF bulb positioning. - by JonE - 25-10-2020, 09:23 AM
RE: APF bulb positioning. - by Colin Reed - 25-10-2020, 09:50 AM
RE: APF bulb positioning. - by Stuart Joseph - 25-10-2020, 11:12 AM
RE: APF bulb positioning. - by jansens - 25-10-2020, 08:10 PM
RE: APF bulb positioning. - by Colin Reed - 25-10-2020, 08:58 PM
RE: APF bulb positioning. - by jansens - 28-10-2020, 05:57 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)