Austinsevenfriends
Lucas Dk4 rotors - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Lucas Dk4 rotors (/showthread.php?tid=6676)



Lucas Dk4 rotors - Robert Foreman - 25-09-2021

A friend has asked me to post a photograph of two dk4 rotors with the question what difference does the tail length make?


.jpg   Rotor arms.jpg (Size: 39.63 KB / Downloads: 376)
 


RE: Lucas Dk4 rotors - John Cornforth - 25-09-2021

According to Lucas, the tail is to prevent back running.


RE: Lucas Dk4 rotors - Bob Culver - 25-09-2021

The tail is to accomodate the centrifugal auto advance range. Cras with little or no auto advance require no long tail.  More insulator materiel assists balance.
(For decades I have run a 1964 Minx. For most of that time the car was not easy to start idled poorly and did not slow run smoothly. It rapidly eroded the cap studs. eventually the rotaor sprked through. It transpired the spark was firong beyond the end of the brass. Everything was stock although the conatcts had been repeatedly restored by stoning so these and the rubbing block were much reduced. Remedied by attention to the vac advance adj and all much improved)

With most ignition systems spark duration is several degrees of revolution so some wdith/length is desirable. (I presume this explains why cars with failing igniton run with reduced power but not actually missing. The effective firing occurs late)


RE: Lucas Dk4 rotors - Robert Foreman - 26-09-2021

Thanks John for the information. 
  Poor running with a Dk4 is almost always due to wear in the bushes for the rotor shaft.


RE: Lucas Dk4 rotors - Chris KC - 27-09-2021

Which in turn may have something to do with how few people seem to re-drill the oil hole after fitting new ones!


RE: Lucas Dk4 rotors - Graham Barker - 27-09-2021

Hi Chris, not sure what you mean by fitting new ones. Did you mean after fitting a new rotor shaft?
Graham Barker.


RE: Lucas Dk4 rotors - Chris KC - 27-09-2021

Bushes