+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Spot the mistake... (/showthread.php?tid=580)
Pages:
1
2
Spot the mistake... - Ruairidh Dunford - 23-12-2017
I didn’t until I placed it onto the studs!!
RE: Spot the mistake... - Alan - 23-12-2017
Err.........
RE: Spot the mistake... - Derek Sheldon - 23-12-2017
Gives better access to the fuel pump, routing for in car heating
RE: Spot the mistake... - Tony Betts - 23-12-2017
You plonks Rodney.
RE: Spot the mistake... - Duncan Grimmond - 23-12-2017
Is that from a Dixi?
RE: Spot the mistake... - AllAlloyCup - 23-12-2017
What’s the take -off Union for?
Bill G
RE: Spot the mistake... - David.H - 23-12-2017
Surely the take off is for the exhaust gas analyser for the catalytic converter?
Happy Christmas!
RE: Spot the mistake... - Stuart Joseph - 23-12-2017
Good morning all. Is it marine? Years ago I sold one to a well known motoring journalist who didn't spot the difference - the comment in his column was rather painful.
Regards from the creative county - Staffordshire.
Stuart
RE: Spot the mistake... - dickie65 - 23-12-2017
(23-12-2017, 10:30 AM)Ruairidh Dunford Wrote: I didn’t until I placed it onto the studs!!
The engine is round the wrong way.
You could invert the manifold and put a stack through the bonnet like a tractor.
No doubt it will fit a Dixi or Rosengart if all else fails.
Have a Good Christmas
RE: Spot the mistake... - Derek Sheldon - 23-12-2017
Dickie, forget the Rosengart, they are the same way round as the Austin.
Dickie, forget the Rosengart, they are the same way round as the Austin.