Austinsevenfriends
Speedo - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Speedo (/showthread.php?tid=5718)



Speedo - Hugh Barnes - 24-02-2021

Could someone kindly confirm which model(s) this might have been fitted to?


.jpg   speedo.jpg (Size: 14.91 KB / Downloads: 293)

I think it's late Chummy up to RN (3 speed) Is that right?

tia..


RE: Speedo - Dave Mann - 24-02-2021

    It's not off an RN which uses a PA speedo.


RE: Speedo - Bert - 24-02-2021

Hi Hugh,

As long as I  know, Chummies up to 1929 had a Speedo bezel with four nuts and a  90º drive outlet. Speedo model PA.
The one shown  is a PN and may be have a 45º drive outlet.

Cordially,

Bert


RE: Speedo - Parazine - 24-02-2021

Later (November '27 on) Chummies and saloons also use a PA.

I think the photo shows an early Austin 10 speedometer.


RE: Speedo - Ivor Hawkins - 24-02-2021

If I remember correctly, my 1934 Austin 10 was fitted with a PN speedo.


RE: Speedo - Hugh Barnes - 24-02-2021

Ah, so not 7 then...

Thanks all...


RE: Speedo - Dave Wortley - 25-02-2021

Would the boat tail 2 seater tourer of 29/30 have that speedo, considering that there was an arc shaped cutout in the dashboard to clear the gearlever/ handbrake? So rather than the cable coming down vertically to the speedo take off on the gearbox, the cable was offset. I may be entirely wrong!


RE: Speedo - Howard Wright - 25-02-2021

Hi

If you are thinking of using it in a Seven the gearing may be wrong.  They are not easy to recalibrate unless you use a gearbox on the drive cable.

Cheers

Howard


RE: Speedo - Hugh Barnes - 25-02-2021

Actually, seem like this is a topic that was briefly touched on before. A PN is rated at 2240 TPM, it would seem and the Austin 10 connection was mentioned then...

https://www.austinsevenfriends.co.uk/forum/showthread.php?tid=2231

should have searched first. Sorry...