+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Gordon England Cup bulkhead frame drawing required? (/showthread.php?tid=5515)
Gordon England Cup bulkhead frame drawing required? - Simon - 12-01-2021
Hi, I am in need of a drawing of the angle iron frame that mounts on the rear engine mounting bolts please. Mine has been destroyed by the wildlife zoo in my loft! Thanks in advance, Simon
RE: Gordon England Cup bulkhead frame drawing required? - Ruairidh Dunford - 12-01-2021
Andrew Goodfellow (Creative Metalwork), supplies these hoops - along with many other Cup Model metal parts - new. Almost all of these are copied form originals and extremely accurate and correct.
It would be worth your while contacting him.
RE: Gordon England Cup bulkhead frame drawing required? - Simon - 13-01-2021
Thanks, I know Andrews work is good, but I like to make things myself - it's much more fun !
RE: Gordon England Cup bulkhead frame drawing required? - Peter Johnson - 13-01-2021
Simon. If you are still struggling to find a drawing the. I’m sure that I have sketch somewhere in the workshop if I can find my log book.
It is not at all a difficult thing to make.
Peter
RE: Gordon England Cup bulkhead frame drawing required? - Simon - 13-01-2021
Thanks Peter, that would be a great help! All the best, Simon