The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.27 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Austinsevenfriends
boulogne racer build - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: boulogne racer build (/showthread.php?tid=5439)

Pages: 1 2 3 4 5


RE: boulogne racer build - Nick Turley - 26-02-2021

Its looking like a proper job


RE: boulogne racer build - Ruairidh Dunford - 26-02-2021

(26-02-2021, 04:27 PM)Tony Betts Wrote: R, if you do get down to have a look. make sure you can get up again before you try.

Less likely by the day!


RE: boulogne racer build - Tony Betts - 26-02-2021

A productive day,

Never have seen the point of having one made at a time.

When it's the same price for three.

   

   

Flywheel now lightens and cleaned.

Carbs cleaned.

   

Had a couple of crankcase repaires done.

And feet made for the block.

It's all coming together, so I can start the engine as soon as the chassis is finished.

   


RE: boulogne racer build - Duncan Grimmond - 27-02-2021

This has the makings of a lovely job Tony, can't wait to see it, crack on!


RE: boulogne racer build - Ivor Hawkins - 27-02-2021

Crikey! A block with no visible cracks, that’s a rarity!

This is a great build, you’ll be overtaking the Highland Coupe at this rate...


RE: boulogne racer build - Tony Betts - 27-02-2021

Thanks duncan,

It's not a race ivor, well more a race between cold spells. And I wanted it rolling, before I have to have the 23 chassis ready. 

The block is one don rawson was building up, when I bought alot of his spares from him.

The holes were drilled and taped, but it had no feet to put on it. So it never got put out for sale. It's been sitting around for about 5 years. So time to make use of it.

Tony.


RE: boulogne racer build - Tony Betts - 27-02-2021

Cleaned up th weld today.

And cleaned and painted the underside of the chassis.

It's hard to see the weld now, happy with that.

The rear axle is now on the bench, but I have a few museum jobs to do before I can crack on with the axle.

I'll see how next week goes. Hope the weather holds.

Tony.