The following warnings occurred: | |||||||||||||||
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.28 (Linux)
|
A lesson in how to be correctly dressed for a Saturday in the garage - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: A lesson in how to be correctly dressed for a Saturday in the garage (/showthread.php?tid=5185) |
A lesson in how to be correctly dressed for a Saturday in the garage - Tony Griffiths - 03-11-2020 Ok, I know it's not an Austin 7, but let's take a lesson from this chap as to the correct form of attire for a day in the workshop: RE: A lesson in how to be correctly dressed for a Saturday in the garage - bob46320 - 03-11-2020 Yep, and no need for all them fancy tools either ! RE: A lesson in how to be correctly dressed for a Saturday in the garage - Steve kay - 03-11-2020 So that's what they dress like in Essex. In next week's edition "How to apply Go Faster stripes." Luckily I am unable to show this morning's workshop costume, but with this year's first light dusting of snow on the top of Welsh hills, it has many more layers than the Ford strangler is wearing. RE: A lesson in how to be correctly dressed for a Saturday in the garage - John Cornforth - 03-11-2020 Not too sure about the game of "Jenga" going on with the engine block ! At least the car is on axle stands and not a wobbly old bit of tree trunk. RE: A lesson in how to be correctly dressed for a Saturday in the garage - Howard Wright - 03-11-2020 Eeeek Elf and safety would have a field day. No eye protection Gloves And that tie just ready to get entangled with the drill or lathe Cheers Howard RE: A lesson in how to be correctly dressed for a Saturday in the garage - Dave Mann - 03-11-2020 No 3 cylinder seems to be missing the inlet valve spring. RE: A lesson in how to be correctly dressed for a Saturday in the garage - bystander - 03-11-2020 and only 7 head studs? RE: A lesson in how to be correctly dressed for a Saturday in the garage - Tony Griffiths - 03-11-2020 (03-11-2020, 12:36 PM)Dave Mann Wrote: No 3 cylinder seems to be missing the inlet valve spring.Trust David to notice that! Well done. It also appears that he's also broken some inlet manifold studs. RE: A lesson in how to be correctly dressed for a Saturday in the garage - Malcolm Parker - 03-11-2020 You could almost think the poor chap is out of his depth! RE: A lesson in how to be correctly dressed for a Saturday in the garage - David.H - 03-11-2020 That's why he needs a copy of the magazine! |