Austinsevenfriends
Crankcase drawings - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Crankcase drawings (/showthread.php?tid=3644)



Crankcase drawings - Charles P - 14-12-2019

Does anyone know of a source of crankcase drawings? Any year will do but earlier would be better.

Thanks

Charles


RE: Crankcase drawings - Ruairidh Dunford - 14-12-2019

What do you need to know Charles?


RE: Crankcase drawings - Charles P - 14-12-2019

(14-12-2019, 03:29 PM)Ruairidh Dunford Wrote: What do you need to know Charles?

Specifically the position of the crank and cam centre lines, in relation to the rest of the crankcase (which really means using the block studs positions as reference)

C


RE: Crankcase drawings - Ruairidh Dunford - 14-12-2019

I has responded to your WhatsApp message.


RE: Crankcase drawings - Chris KC - 14-12-2019

This is the nearest thing I'm aware of Charles.
I fear you're on your own if trying to establish dimensions/ clearances.
Of course dimensioned crankshaft drawings are also available as a reference.

[attachment=8359]


RE: Crankcase drawings - Charles P - 14-12-2019

(14-12-2019, 04:16 PM)Chris KC Wrote: This is the nearest thing I'm aware of Charles.
I fear you're on your own if trying to establish dimensions/ clearances.
Of course dimensioned crankshaft drawings are also available as a reference.

Thanks Chris.
I have that one and as you say, I'm probably going to have to do it myself

Charles